================================================================================
Intel(R) Xeon(R) Processor-Based Server BIOS Development
================================================================================
INTEL Enterprise Products and Services Division
Intel Corporation
2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA
================================================================================
DATE    : April 10, 2009
TO      : Multi-Core Intel(R) Xeon(R) Processor-Based Server Platform customers
SUBJECT : BIOS Release notes for version R0036
================================================================================
                           LEGAL INFORMATION
================================================================================

Information in this document is provided in connection with Intel Products
and for the purpose of supporting Intel developed server boards and systems.
No license, express or implied, by estoppel or otherwise, to any intellectual 
property rights is granted by this document. Except as provided in Intel's 
Terms and Conditions of Sale for such products, Intel assumes no liability 
whatsoever, and Intel disclaims any express or implied warranty, relating to 
sale and/or use of Intel products including liability or warranties relating 
to fitness for a particular purpose, merchantability, or infringement of any 
patent, copyright or other intellectual property right. Intel Corporation 
may have patents or pending patent applications, trademarks, copyrights, or
other intellectual property rights that relate to the presented subject matter.
The furnishing of documents and other materials and information does not 
provide any license, express or implied, by estoppel or otherwise, to any such
patents, trademarks, copyrights, or other intellectual property rights.  
Intel products are not intended for use in medical, life saving, or life 
sustaining applications. Intel may make changes to specifications and product
descriptions at any time, without notice.

Intel is a registered trademark of Intel Corporation. 

*Other names and brands are the property of their respective owners.

Copyright (C) 2009 Intel Corporation.

================================================================================
                              ABOUT THIS RELEASE
================================================================================
Build Stamp : S5500.86B.01.00.0036.04102009
Build Date  : April 10, 2009

================================================================================
                           BIOS COMPONENTS/CONTENTS
================================================================================
Processors supported: 
  Quad-Core Intel(R) Xeon(R) Processor 5500 series
    w/ <= 6.40GT/s Max Intel(R) QuickPath Interconnect Speed

Microcode update versions:
CPUID     Version      Status

0x106A5   0x0000000F   Production Candidate  (Intel(R) Xeon(R) Processor 5500 series D0)


On-Board Component Option ROM Versions:
IBMC Matrox VGA                : VBE BIOS V3.8SM
ICH9R/ICH10 AHCI Option ROM    : iSrc 1.18_E 05012008
ICH10 SATA SW-RAID Option ROM  : vA.08.09161344I
82575EB iSCSI Boot Option ROM  : v2.2.96
82567LM, 82571EB, 82574L,
  82575EB, & 82576 PXE Version : Intel(R) Boot Agent GE v1.3.27
82599EB PXE Version            : Intel(R) Boot Agent XG v2.1.30 Alpha-3

Intel(R) QPI Reference Code Version : 1.03
Memory Reference Code Version       : 1.03

Management Engine Firmware Version  : SPS_01.01.00.004.0_Production

================================================================================
                       SYSTEM FIRMWARE REQUIREMENTS
================================================================================
BIOS Update Utility: 
  UEFI iFlash32 2.6 Build 10

Production boards:
  Product		Fab Version	BMC	FRUDSR		EEPROM	HSC 
  S5500BC		Fab3, Fab4	00.34	FBC_12		1.1	2.09
  S5520HC		Fab3, Fab4	00.34	FHC_15		1.3	2.09
  S5520SC		Fab2		00.34	FHC_15		1.3	2.09
  S5520UR		Fab3->Fab6	00.34	FUR_14		1.3	2.09
  S5520WB		Fab1->Fab3	00.34	FWB_07		1.4	N/A
  S5500GD		Fab3->Fab8	0.726	GOOD_008	TBD	N/A
  S5520VI		Fab1->Fab3	00.09	TBD		TBD	N/A

The following update process must be followed to ensure a trouble free update from the BIOS R0025/R0025.1, BMC00.28 releases.
1.	BMC firmware to 00.34 or later
2.	BIOS R0033 or later
3.	Manageability Engine (ME) firmware 01.10 or later
4.	Latest FRU/SDR package specific to the baseboard.


================================================================================
                           INSTALLATION NOTES
================================================================================

WARNING:  It is very important to follow these instructions as they are written.
Failure to update using the proper procedure may cause damage to your system.

Updating from BIOS revisions R0018 or later:

User can update BIOS flash image via either of the following methods...
UEFI iFlash32 2.6 Build 10
   1.  Boot the system to EFI Shell
   2.  Copy IFlash32.efi and BIOS .CAP file to a HD or USB Flash Drive
       ( Do not use the Rec.CAP file as it will clear NVRAM and should
         only be used for Recovery - See Recovery Instructions below )
   3.  Map the respective storage device in system with the command
	   Shell> map -r
   4.  Change the Shell to mapped device file system
	   Example: Shell> fs0: (or fs1:)
   5.  Run the IFlash32 utility on the prompt
	   fs0:\> IFlash32 [File Name] /u /ni
   6.  Reboot system after the update is completed.

================================================================================
                        BIOS RECOVERY INSTRUCTIONS
================================================================================

The Recovery process can be initiated by setting the recovery jumper
(called BIOS Recovery Boot Jumper)

A BIOS recovery can be accomplished from SATA CD and USB Mass Storage device. 
Please note that recovery from USB floppy is not supported on this platform. 

The SATA CD image for recovery is created using El-Torito format image (bootable).

The recovery media must contain the following files under the BIOS_R0036_Recovery directory:
   1.  FVMAIN.FV
   2.  UEFI iFlash32 2.6 Build 10
   3.  *Rec.CAP
   4.  Startup.nsh (update accordingly to use proper *Rec.CAP file)

BIOS starts the recovery process by first loading and booting to the recovery image 
file (FVMAIN.FV) on the root directory of the recovery media (SATA CD or USB disk).
This process takes place before any video or console is available. Once the system boots 
to this recovery image file (FVMAIN.FV), it will boot automatically into EFI Shell to 
invoke the Startup.nsh script and start the flash update application (IFlash32.efi). 
IFlash32.efi requires the supporting BIOS Capsule image file (*Rec.CAP). 
After the update is complete, there will be a message displayed stating that the
"BIOS has been updated successfully" indicating the recovery process is finished.
The User should then switch the recovery jumper back to normal operation and restart
the system by performing a power cycle.


The following steps demonstrate this recovery process:
   1.  Power OFF the system.
   2.  Insert recovery media.
   3.  Switch the recovery jumper. Details regarding the jumper ID and location
       can be obtained from the Board EPS for that Platform.
   4.  Power ON the system.
   5.  The BIOS POST screen will appear displaying the progress, and system automatically 
       boots to the EFI SHELL.
   6.  Startup.nsh file executes, and initiates the flash update (IFlash32.efi)
       with new capsule file (*Rec.CAP). The regular IFlash message will be displayed at
       the end of the process, once the flash update succeeds.
   7.  Power OFF the system, and revert the recovery jumper position to "normal operation".
   8.  Power ON the system.
   9.  Do *NOT* interrupt the BIOS POST during the first boot.

================================================================================
                            KNOWN ISSUES/WORKAROUNDS
================================================================================

- The UEFI iFlash32 BIOS Update Utility should only be used after the R0018 or
  later BIOS version is properly installed on your system.  Refer to the section
  regarding INSTALLATION NOTES above.

- If performing BIOS recovery process and the system hangs at POST Code 0x34 before
  the BIOS POST screen appears, it may a require a warm reset via the front panel
  or AC power cycle for recovery to properly detect the recovery media and load
  FVMAIN.FV from the recovery device.

- For S5500BC, S5520HC, S5520SC, S5500UR, & S5500WB Platforms, please ensure that
  the BMC FW installed is v0.31 or later before updating to the R0029 or later
  BIOS release.  Using BIOS R0029 with any BMC FW prior to v0.31 could cause the
  system to automatically shutdown upon A/C power cycles.


================================================================================
                              FEATURES ADDED/REMOVED
================================================================================

  -    Add Intel(R) Xeon(R) Processor 5500 series D-0 processor microcode Production Candidate patch revision 0x04.
 
================================================================================
                              FIXED ISSUES
================================================================================
================================================================================
                                R0036
================================================================================
- Fixed: Can't enter the Option-ROM of the SROMBSASMR RAID adapter.
- Fixed: SROMBSASMR adapter causes a system lock up and can't enter the OPROM after pressing hot key <CTRL+G>.
- Fixed: Pressing <ESC> does not show POST screen and fails to enter SATA SW RAID BIOS console when Quiet Boot is enabled.
- Fixed: The system will Not override OLTT selection if it can support CLTT.
- Fixed: Remote Serial Console is not disconnected when Console Redirection is disabled in BIOS setup.

Other:
- Corrected: BIOS setup SATA Mode [LEGACY] help Text statement was incorrect.

================================================================================
                                R0034
================================================================================
- Fixed: Processor Hyper-Threading setting to disabled will reset to enabled when reentering BIOS setup.
- Fixed: OS installation will stop while RAID adapter  under RHEL5.3 32bit
- Fixed: OS installation will hang and appear while Loading mptsas driver under RHEL5.3 32bit
- Fixed: Mass Storage Controller Configuration does not display correct information

================================================================================
                                R0033
================================================================================
- Fixed: SW RAID option for ICH10R disappears when AXX4SASMOD is present
- Fixed: Quad port Kawela Pxe Boot hang booting to RIS server
- Fixed: BIOS Boot order changes with USB device changes
- Fixed: BIOS recovery fails intermittently
- Fixed: DIMM information is incorrect when DIMM population is A1/A2/D2
- Fixed: HDD running in PIO mode and causing poor performance under Microsoft* Windows* 2003
- Fixed: BIOS setup indicates Hyperthreading is enabled for processors without Hyperthreading support.

================================================================================
                                R0031
================================================================================
- Fixed: "TPM Administrative Control" Option in Security Menu removed on S5500WB.
- Fixed: BIOS Boot Manager Page goes blank on performing load default settings
- Fixed: Platform/Board ID mismatch in BIOS setup
- Fixed: System can't boot to WebBIOS of LSI 1078 midplane with hardware RAID
- Fixed: Cannot go into the LSI RAID BIOS Console when SATA is configured for enhanced or compatibility mode
- Fixed: SAS SW RAID option in BIOS SETUP does not appear when SAS IO module is installed
- Fixed: Qlogic* QLE2464/QLE2564 is not recognized in the 2U PCI riser
- Fixed: Disabling "Intel(R) SAS Entry RAID Module" in bios, removes the entry

================================================================================
                                R0030
================================================================================
- Fixed: ACPI S3 resume hang with Dual-processor and Microsoft* Windows* 2003 32 bit
- Fixed: System will easily hang if greater than 14 USB devices are populated 
- Fixed: Intel(R) pro quad port EXPI9404PTL is missing from the Microsoft* Windows* device manager
- Fixed: Unable to install Microsoft* Windows* 2008 x64 UEFI
- Fixed: SuSE* SLES10 reports: Uhhuh. NMI received for unknown reason 20 & 30
- Fixed: System unable to execute BIOS recovery from USB DVD/CD-ROM.
- Fixed: Quad NIC IO module boot option disappears when user disables the onboard NIC ROM
- Fixed: Second NIC is missing in BIOS Setup Boot Manager

================================================================================
                                R0029
================================================================================
- Fixed: IOH therm trip doesn't assert an event and shutdown when IOH temperature is increased above the threshold
- Fixed: 1064e based IR card in slot 2 activates incorrect RAID options in BIOS Setup
- Fixed: Willappa Bay RAID card is not getting detected
- Fixed: Manta Ray (SROMBSASMR) Drives Don't Appear In Microsoft* Windows* 2008 EMT64
- Fixed: SATA port 4 & 5 device can't be detected in Compatibility & SW RAID mode
- Fixed: After Enabling BIOS Console Redirection, nothing is redirected on the first boot
- Fixed: F2 Setup screen shows Blank under Boot Manager.
- Fixed: SUT can not detect device on SATA Port 4/5 in Compatibility Mode under BIOS R0028

================================================================================
                                R0028
================================================================================
- Fixed: Install two config of MBE DIMM mix then system behavior not right
- Fixed: Boot system with iBIST reworked DIMM install don't show expect behavior
- Fixed: Disable SAS RAID function in BIOS menu then Manta Ray cannot be detected
- Fixed: Console Redirection on Serial port A failed
- Fixed: Can't boot to SATA RAID OpROM.
- Fixed: S5520SC sometimes boots with 3 beep codes during POST with UDIMM's installed
- Fixed: Microsoft* Vista* 64-Bit installation fails under AHCI mode.

================================================================================
                                R0026
================================================================================
- Fixed: TPM driver reports errors during ACPI S3 resume under Microsoft* Vista*
- Fixed: BIOS Setup hangs after "Load Default Values" and "Save Changes"
- Fixed: Hotswap USB devices installed while in BIOS setup the system take about 2 minutes to detect the USB device
- Fixed: System can't boot to WebBIOS of add-on storage Card installed on riser

================================================================================
                                R0025
================================================================================
- Fixed: Can't boot to SATA RAID OpROM 
- Fixed: No Hard Disk found when selecting SATA Mode as SW RAID 
- Fixed: Booting from DVDROM takes approximately 1 minute when in Enhanced Mode.


(END OF RELEASE NOTES]


