                  ACCOLADE ALL-STAR SPORTS COLLECTION
                  -----------------------------------

                       -  HOW TO PLAY THE GAMES -

To play the games on this CD-ROM, log onto your CD-ROM drive and type
START. When the menu appears select one of the games using the cursor
keys or the mouse. Before playing "Unnecessary Roughness" please read
the paragraph below.

                    -  SAVING FILES TO HARD DRIVE -

Because CD-ROM cannot be saved to, the games on this compilation will
use your hard drive to save any files that need to be saved. These files
are saved in a directory called ALLSTAR, in the root directory of your
hard drive. This directory is created automatically the first time a
game saves a file.

                      -  "UNNECESSARY ROUGHNESS" -

The first time you play "Unnecessary Roughness" the game will copy the
team files to your hard drive. This happens automatically the first time
a team file is accessed in the game. The copying will require upto 4 MEG
of hard drive space and could take 1 MINUTE or more to copy the files.
Please ensure you have at least 4 MEG of hard drive space available
before playing this game for the first time.

If UNNECESSARY ROUGHNESS gives an "Out of memory message" or you are
experincing freezes in the game you will need to boot your system "Clean".
Below please find instructions on how to do this if you are running this
game directly from the CD-ROM. 


     * NOTE : THE CD-ROM VERSION OF UNNECESSARY ROUGHNESS WILL ONLY PLAY
              OFF THE CD.  YOU WILL NOT BE ABLE TO INSTALL THIS GAME ONTO
              YOUR HARD DRIVE.


BOOTING CLEAN -- USING DOS 5.0

You will need a floppy disk that will fit into your A: drive; this procedure 
will only work in drive A.  Insert the floppy disk into your A: drive and 
type "FORMAT A:\S". This will erase all data on the diskette so use one that 
is new or no longer needed.

When the disk has finished formating change to your A: drive.  Type the 
following lines at the A prompt:

    COPY CON CONFIG.SYS <PRESS ENTER>

    DOS=HIGH <PRESS ENTER>
    DEVICE=C:\DOS\HIMEM.SYS <PRESS ENTER>
    *Your cd-rom driver.  You can find this command line in your config.sys 
     on the c: drive.  These command lines often look similar to this:
    "DEVICEHIGH=C:\SB16\DRV\SBCD.SYS /D:MSCD001 /P:220" <ENTER>

Next hold down the CONTROL KEY <CTRL> and Z, and then press <ENTER>. You 
should see the message "1 FILE COPIED". If the message does not appear 
please follow these instructions again.  REMEMBER, ONLY USE THESE 
INSTRUCTIONS ON THE A: DRIVE!

Next type these lines at the A: prompt:

    COPY CON AUTOEXEC.BAT

    PROMPT $P$G <ENTER>
    *All sound card lines.  You can find these command lines in your 
     autoexec.bat on the c: drive.  They often look similar to this:
    "SET BLASTER=A220 I5 D1 H5 P330 T6"
    "SET SOUND=C:\SB16"
    "C:\SB16\SB16SET /M:220 /VOC:220 /CD:220 /MIDI:220 /LINE:220 /TREBLE:0"
    "C:\SB16\SBCONFIG.EXE /S"
    "LH C:\SB16\DRV\MSCDEX.EXE /D:MSCD001 /V /M:15"
    Please note this is how these lines MAY look. If you have a Pro Audio 16 
    or other sound card these lines will be different.


Now hold down the CONTROL KEY <CTRL> and Z, then press <ENTER>. You
should see the message "1 FILE COPIED". If the message does not appear 
please follow these instructions again.  REMEMBER, ONLY USE THESE 
INSTRUCTIONS ON THE A: DRIVE!

You have just created a clean boot disk.  In order for the disk to take
effect you must reboot your computer with this disk in the A: drive.


BOOTING CLEAN -- USING DOS 6.0 OR 6.2:

     Reboot your computer.

     When you see the message "STARTING MS-DOS" hit the <F8> key at the top 
     of your keyboard.

     You will see the message "DOS WILL PROMPT YOU CONFIRM EACH CONFIG.SYS
     COMMAND". Say yes to only the following:

     DOS=HIGH
     DEVICE=C:\DOS\HIMEM.SYS
     *Your cd-rom driver. This will often look similar to the following:
      "DEVICEHIGH=C:\SB16\DRV\SBCD.SYS /D:MSCD001 /P:220"

     Say no to the rest of your lines. You will then be asked if you want to
     process your AUTOEXEC.BAT.  Say yes to this line.  If you have DOS 6.2
     you will need to say yes to all of the lines in your AUTOEXEC.BAT.

     If you need further assistence you can call Accolade Tech Support at
     (408) 296-8400 from 8am to 5pm Pacific time or FAX us at (408) 246-0231.


                       -  PRINTING THE MANUALS -

To print the manuals from the games turn on your printer and type:

PRINT ROUGHNES
PRINT NICKLAUS
PRINT HARDBALL
PRINT CONTROLS

The manuals can also be viewed on the screen from the main menu.

Have Fun!

                             ACCOLADE 1994
