Copyright: Copyright (c) 1993-95 Standard Microsystems Corp.


SMC 8020BTM EtherEZ PC Card Setup

Use this dialog box to configure settings for the SMC8020 EtherEZ Lan/Modem PC card.  For more information click on a field in the dialog box displayed below or press <TAB> to move to the field and then press <ENTER>...


IRQ Level

Select an interrupt level for this adapter card.  IRQ5 is the default setting.


I/O Port
I/O Base

Select an I/O Port for this adapter card.  0x0300 is the default setting.


Media Type

Select the media type for this adapter card.  Select 10BaseT or BNC depending on the cabling you are using.  The default is AutoDetect.


Attribute Memory

Select the memory range used for this adapter card.  The default is 0xD0000.


Modem I/O Port
Modem I/O Base

Select an I/O Port for the modem on this adapter card.  0x03E8 is the default setting.


Modem Port

Select the port at which the modem will run at.  The default is COM3.


Modem IRQ

Select the IRQ at which the modem on the adapter card will run at.  The default is 5.


Network Address

Select 12 hexadecimal digits.  The address must specify the "locally administered" bit on and the "group" bit off.  In other words, the two low order bits of the high-order byte must equal the value 0x02.  Each adapter on the network must have a unique network address.  The default value is the burned in address contained in the adapter EPROM.


Continue

Select Continue to setup the PC card you have selected in the Function Select section.


Continue
OK

Select OK  to setup the PC card at the values youve selected.


Cancel

Select Cancel to exit without changing the settings.


Help

Select Help to display this file.


LAN Only

Select LAN Only to setup your PC card for local area network use only.


Help
Modem Only

Select Modem Only to setup your PC card for modem use only.


Help
LAN/Modem

Select LAN/Modem to setup your PC card for both LAN and modem use.


SMC 8020BT EtherEZ LAN Setup
SMC 8020BT EtherEZ PC Card Setup

Use this dialog box to configure only the 8020 EtherEZ card local area network setup.  For more information click on a field in the dialog box displayed below or press <TAB> to move to the field and then press <ENTER>...


Adapter Speed

Select the speed at which the adapter operates.  The default is High Speed or 100mb.  If Low Speed is selected then the adapter will operate at 10mb.


Contents
SMC 8020 EtherEZ PC Card Help Contents

Select one of the topics below for more information on setting up a specific adapter.

SMC 8020BTM EtherEZ PC Card Setup

SMC 8020BT EtherEZ PC Card Setup


SMC 8020 EtherEZ Modem Only Setup

Use this dialog box to configure only the 8020 EtherEZ card modem setup.  For more information click on a field in the dialog box displayed below or press <TAB> to move to the field and then press <ENTER>...


SMC 8020 EtherEZ LAN/Modem Setup

Use this dialog box to configure the 8020 EtherEZ card local area network and modem setup.  For more information click on a field in the dialog box displayed below or press <TAB> to move to the field and then press <ENTER>...