Contents

The following Help Topics are available :

Basic setup parameters configuration

Presets


Basic setup parameters configuration

This screen allows you to define basic parameters for Solution-Pac 97.

Automatic startup

Check this box to automatically start Solution-Pac 97 at computer startup.

Serial port

Select the serial port on which the UPS is connected. This list is disabled and contains 'Auto' when the 'Pnp UPS' is checked.

Pnp UPS

Check this box if your UPS is Plug and Play (Pnp). Check this box disables the serial port list and puts 'Auto' within it.

Delay before shutdown

Enter the maximum delay (in minutes) before Solution-Pac 97 start the automatic shutdown procedure after an utility failure.

Shutdown duration

Enter the approximate duration (in seconds) necessary for a complete computer shutdown.

Ok

Saves parameters and closes the program.

Cancel

Closes the program without saving parameters.

Help

Displays this help panel.

Preset

Open the window allowing you to select the predefined configuration according to your UPS.


Presets

This window allows you to select a predefined configuration according to your UPS.

Select a predefined configuration by clicking on it.

Ok

Saves your choice and goes back to the main window.

Cancel

Goes back to the main window without saving your choice.

Help

Displays this help panel.