Copyright: Digital Equipment Corporation


SMC 8432 Ethernet PCI Adapter
SMC 8432 - EtherPower PCI Ethernet Adapter

Use this dialog box to setup the data rate for the Standard Microsystems Corporation's SMC 8432 - EtherPower PCI Ethernet adapter.

AutoDetect

Twisted Pair

Twisted Pair - Full Duplex

Twisted Pair - No Link Test

BNC

AUI


SMC 8434 Ethernet PCI Adapter
SMC 8434 - EtherPower2 PCI Ethernet Adapter

Use this dialog box to setup the data rate for the Standard Microsystems Corporation's SMC 8432 - EtherPower2 PCI Ethernet adapter.

AutoDetect

Twisted Pair

Twisted Pair - Full Duplex

Twisted Pair - No Link Test

BNC

AUI


SMC9332 Fast Ethernet  PCI Adapter
SMC 9332 - EtherPower 10/100 PCI Fast Ethernet Adapter

Use this dialog box to setup the data rate for the Standard Microsystems Corporation's SMC 9332 - EtherPower 10/100 PCI Fast Ethernet adapter.

AutoSense

100Mbps

100Mbps - Full Duplex

10Mbps


Autodetect
Check in sequence the Twisted Pair port, the BNC port and the AUI port and select the first port connected to a live wire.

This detection takes place during driver initialization.Ports should be connected before the system boots and  should not be switched during run time.

AutoDectect does not support TP's Full_Duplex and No_Link_Test modes.


Twisted Pair
Establish a 10BaseT connection through the Twisted Pair port.


Twisted Pair - Full Duplex
Establish a Full Duplex 10BaseT connection through the Twisted Pair port.


Twisted Pair - No Link Test
Establish a 10BaseT connection with no Link Integrity Test through the Twisted Pair port.

Select this option if the adapter is connected to a hub which does not generate link pulses to check the link integrity.


BNC
Establish a 10Base2 (Thinwire) connection through the BNC connector port.


AUI
Establish a 10Base5 (Thickwire) connection through the AUI 15_pin connector port.


100Mbps
Establish a 100BaseT (100Mbps) connection through the 100Mbps port.


100Mbps - Full Duplex
Establish a Full Duplex 100BaseT connection through the 100Mbps port.


10Mbps
Establish a 10BaseT connection through the 10Mbps port.


10 Mbps - Full Duplex
Establish a Full Duplex 10BaseT connection through the 10Mbps port.


AutoSense
Autosense dynamically the media ports supported by the adapter. The media's precedence is TP,BNC,AUI.

AutoSense does not support TP's Full_Duplex and No_Link_Test modes.


AutoSense - Nway Enabled
Autosense dynamically the media ports supported by the adapter. The media's precedence is TP,BNC,AUI.

Twisted Pair's NWAY negociation is enabled.


Twisted Pair - Nway Enabled
Establish a 10BaseT connection through the Twisted Pair port.

Twisted Pair's NWAY negociation is enabled.


AutoSense
Autosense dynamically the media ports supported by the adapter. The media's precedence is 100Mbps,10Mbps.

AutoSense does not support Full_Duplex modes.