;NVALERT.INI 
;	-- see comments at bottom of file

;MessageId=2016 Severity=Error SymbolicName=EVENT_SRV_NO_VIRTUAL_MEMORY
;The server was unable to allocate virtual memory.

[Srv.3.2016]
;;wannabe AlertType=02
AlertType=03
AlertDescription=5008
ProbableCauses=1057
;5008 N OUT OF MEMORY; ; 1057 N RESOURCE LIMIT REACHED;
FailureCauses=1100,F8c0
FailureDetData=00,5A,%C;00,13,%M %I EVENT_SRV_NO_VIRTUAL_MEMORY

;MessageId=2013 Severity=Warning SymbolicName=EVENT_SRV_DISK_FULL
;The %2 disk is at or near capacity.  You may need to delete some files.

[Srv.2.2013]
;;wannabe AlertType=02
AlertType=03
;5117 N VOLUME SPACE THRESHOLD REACHED; ; 5001 N DASD MEDIA;
AlertDescription=5117
ProbableCauses=5001
; Insufficient storage media space avail for DEVICE <s2)
UserCauses=f0a0,f8c0
UserDetData=00,6b,%S1;00,5A,%C;00,13,%M %I EVENT_SRV_DISK_FULL

;MessageId=3001  SymbolicName=EVENT_RDR_RESOURCE_SHORTAGE
;The redirector was unable to allocate memory.

[Rdr.3.3001]
AlertType=03
;5008 N OUT OF MEMORY; 1057 N RESOURCE LIMIT REACHED;
AlertDescription=5008
ProbableCauses=1057
FailureCauses=F8C0
FailureDetData=00,5A,%C;00,13,%M %I EVENT_RDR_RESOURCE_SHORTAGE

;MessageId=4157  Severity=Error SymbolicName=EVENT_ARP_IPADDR_IN_USE
;ARP IP address %2 is already in use by another node.
;TCP/IP will not use an address that is already in use.

[Tcpipsys.3.4157]
AlertType=01
;3250 N NETWORK ADDRESSING CONFLICT; ;8003 N COMMUNICATION CONFIG;
AlertDescription=3250
ProbableCauses=8003
;Communications configuration error; <> duplicates logical lan address of alert originator
InstallCauses=80C4,F0A4
InstallDetData=00,FE,%S1
FailureCauses=1206,f8c0
FailureDetData=00,5A,%C;00,13,%M %I EVENT_ARP_IPADDR_IN_USE


;MessageId=6000  SymbolicName=EVENT_LOG_FULL
;The %1 log file is full.

[Eventlog.3.6000]
AlertType=03
;5107 N ERROR LOG LIMIT REACHED;1057 N RESOURCE LIMIT REACHED; 0501 N STORAGE SUBSYSTEM;
AlertDescription=5107
ProbableCauses=1057
;File full <message log> <>
UserCauses=73A0,F8C0
UserDetData=00,b3,%S0;00,5A,%C;00,13,%M %I EVENT_LOG_FULL 

;MessageId=2504 Severity=Warning SymbolicName=EVENT_SRV_CANT_BIND_TO_TRANSPORT
;The server could not bind to the transport %1.

[Server.3.2504]
AlertType=01
;2200 N SOFTWARE OPERATION FAILURE; 8003 N COMMUNICATION CONFIG;
AlertDescription=2200
ProbableCauses=8003
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I EVENT_SRV_CANT_BIND_TO_TRANSPORT

;MessageId=9005 Severity=Error  SymbolicName=EVENT_TRANSPORT_BINDING_FAILED
;%2 failed to bind to adapter %3.

[Nbf.3.9005]
AlertType=01
;2200 N SOFTWARE OPERATION FAILURE; 0503 N COMMUNICATIONS SUBSYSTEM;
AlertDescription=2200
ProbableCauses=0503
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I EVENT_TRANSPORT_BINDING_FAILED 

;MessageId=0x0004 Facility=Ft Severity=Error SymbolicName=FT_RECOVERY_ERROR
;An error occurred while attempting to recover data from the fault tolerance set containing %1.

[FT.3.4]
AlertType=01
; 1312 N DISK OPERATION ERROR; ; 3131 N DASD CONTROL UNIT;
AlertDescription=1312
ProbableCauses=3131
;Initialization error STORAGE <>
FailureCauses=12b7,f8c0
FailureDetData=00,88,%S0;00,5a,%c;00,13,%M %I FT_RECOVERY_ERROR

;MessageId=0x0006 Facility=Ft Severity=Error SymbolicName=FT_ORPHANING
;The device %1 that is part of a fault tolerance set has failed and will no longer be used.

[FT.3.6]
AlertType=01
AlertDescription=1312
ProbableCauses=3131
;Disk error reading <>
FailureCauses=10B9,F8c0
FailureDetData=00,8C,%S0;00,5A,%C;00,13,%M %I FT_ORPHANING 

;MessageId=0x0007 Facility=Ft Severity=Error SymbolicName=FT_SET_DISABLED
;The fault tolerance set containing device %1 has been disabled.

[FT.3.7]
;;wannabe AlertType=15
AlertType=01
;1340 N DASD MIRRORING LOST;;6310 N DASD DEVICE;
AlertDescription=1340
ProbableCauses=6310
; Partition failure and shutdown on <>
FailureCauses=F1B0,f8c0
FailureDetData=00,8C,%S0;00,5A,%C;00,13,%M %I FT_SET_DISABLED 

;MessageId=0x0009 Facility=Ft Severity=Error SymbolicName=FT_RECOVER_SINGLE_MEMBER
;The fault tolerance member %1 data was recovered from redundant copy.

[FT.3.9]
;;wannabe AlertType=14
AlertType=01
;A000 N PROBLEM RESOLVED;5001 N DASD MEDIA;
AlertDescription=A000
ProbableCauses=5001
;Initialization error VOLUME <>
FailureCauses=12b7,f8c0
FailureDetData=00,8c,%S0;00,5A,%C;00,13,%M %I FT_RECOVER_SINGLE_MEMBER

;MessageId=0x000a Facility=Ft Severity=Error SymbolicName=FT_DOUBLE_FAILURE
;A sector failure occurred on accesses to both copies of the data.

[FT.3.10]
AlertType=01
AlertDescription=1312
ProbableCauses=3131
;Excessive disk failures on <>
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I FT_DOUBLE_FAILURE

;MessageId=0x000b Facility=Ft Severity=Error SymbolicName=FT_ORPHANED_MEMBER
;A disk fault tolerance set member listed in the configuration information was missing.

[FT.3.11]
;;wannabe AlertType=15
AlertType=01
;Disk Operation Error; Storage Configuration
AlertDescription=1312
ProbableCauses=8001
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I FT_ORPHANED_MEMBER

;MessageId=0x000c Facility=Ft Severity=Error SymbolicName=FT_MISSING_MEMBER
;A stripe set or volume set member listed in the configuration information was missing.

[FT.3.12]
AlertType=01
;Disk Operation Error; Storage Configuration
AlertDescription=1312
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I FT_MISSING_MEMBER 

;MessageId=0x000d Facility=Ft Severity=Error SymbolicName=FT_BAD_CONFIGURATION
;The fault tolerance driver configuration information is corrupt.

[FT.3.13]
AlertType=01
;Disk Operation Error; Storage Configuration
AlertDescription=1312
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I FT_BAD_CONFIGURATION 

;MessageId=0x000e Facility=Ft Severity=Error SymbolicName=FT_CANT_USE_SET
;The FT set containing %1 cannot be used.

[FT.3.14]
AlertType=01
;Storage Subsystem Failure;Device not available
AlertDescription=1601
ProbableCauses=6003
FailureCauses=12b7,f8c0
FailureDetData=00,8c,%S0;00,5A,%C;00,13,%M %I FT_CANT_USE_SET

;MessageId=0x0017 Facility=Ft Severity=Error SymbolicName=FT_MIRROR_COPY_FAILED
;Initialization of a mirror failed.

[FT.3.23]
;;AlertType=15
AlertType=01
;Perfomance Degraded;Dasd Control Unit
AlertDescription=4000
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I FT_MIRROR_COPY_FAILED

;MessageId=0x0018 Facility=Ft Severity=Error SymbolicName=FT_PARITY_SYNCHRONIZATION_FAILED
;Synchronization of a stripe with parity set failed.

[FT.3.24]
AlertType=01
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I FT_PARITY_SYNCHRONIZATION_FAILED

;MessageId=0x0019 Facility=Ft Severity=Error SymbolicName=FT_REGENERATION_FAILED
;Regeneration of a stripe with parity or mirror set failed.

[FT.3.25]
AlertType=01
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I FT_REGENERATION_FAILED 

;MessageId=0x001a Facility=Ft Severity=Error SymbolicName=FT_PARITY_INITIALIZATION_FAILED
;Initialization of a stripe with parity set failed.

[FT.3.26]
AlertType=01
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I FT_PARITY_INITIALIZATION_FAILED 


;MessageId=0x001b Facility=Ft Severity=Warning SymbolicName=FT_DIRTY_SHUTDOWN
;The fault tolerant driver detected the system was shutdown dirty.

[FT.3.27]
AlertType=01
;Disk Operation Error; DASD Control Unit
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I FT_DIRTY_SHUTDOWN 

;;;
[FT.3.127]
AlertType=01
;Disk Operation Error; DASD Control Unit
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,%M %I FT_DIRTY_SHUTDOWN 

[FT.3.227]
AlertType=02
;Disk Operation Error; DASD Control Unit
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,x02 %M %I FT_DIRTY_SHUTDOWN 

[FT.3.327]
AlertType=03
;Disk Operation Error; DASD Control Unit
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,x03 %M %I FT_DIRTY_SHUTDOWN 

[FT.3.1027]
AlertType=10
;Disk Operation Error; DASD Control Unit
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,x10 %M %I FT_DIRTY_SHUTDOWN 

[FT.3.1127]
AlertType=11
;Disk Operation Error; DASD Control Unit
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,x11 %M %I FT_DIRTY_SHUTDOWN 

[FT.3.1227]
AlertType=12
;Disk Operation Error; DASD Control Unit
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,x12 %M %I FT_DIRTY_SHUTDOWN 

[FT.3.1327]
AlertType=13
;Disk Operation Error; DASD Control Unit
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,x13 %M %I FT_DIRTY_SHUTDOWN 

[FT.3.1427]
AlertType=14
;Disk Operation Error; DASD Control Unit
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,x14 %M %I FT_DIRTY_SHUTDOWN 

[FT.3.1527]
AlertType=15
;Disk Operation Error; DASD Control Unit
AlertDescription=1312
ProbableCauses=3131
FailureCauses=f8c0
FailureDetData=00,5A,%C;00,13,x15 %M %I FT_DIRTY_SHUTDOWN 

;The audit log was cleared
[security.4.517]
AlertType=01
;Security event;Local system operator
AlertDescription=C000
ProbableCauses=7001
;Originator resource purged,<> on <> requested operation
FailureCauses=1223,F0C1
FailureDetData=00,98,%s4\%s3;00,5A,%C

;Logon Failure
[security.5.529]]
AlertType=01
; Unauthorized access attempted;User
AlertDescription=C007
ProbableCauses=7004
;Unauthorized access attempted on <account>;Problem detected by <server>
UserCauses=71A0,f8a0
UserDetData=00,94,%s1\%s0 logon type %s2;00,5a,%C
;;FailureCauses=1223,F0C1
;;FailureDetData=00,98,%s1\%s0;00,5A,%C

;
; Caveats -
;
; No white space except in 3rd arg of xxxDetData
; 
; NetView often filters events based on AlertType, commonly just 01, 03 12
; 	Some of the events here use other AlertTypes
;
; NVAlert doesn't support alerts > 256 bytes, don't get too chatty.
;
; The incantation:
;	FailureCauses=...,F8c0
;	FailureDetData=...;00,5A,%C;00,13,%M %I EVENT_xxx
; Expands to a console message: Problem detected by:
;				 SERVER <computer>
;				 STATUS CODE <module> <eventId> EVENT_xxx